0x35 DSP Status

DSP 0x6a → GT 0x3b

The DSP uses this command to report the current mode, echo, room and equaliser settings.

Example Frames

6A 0D 3B 35 05 01 23 08 22 42 61 82 A5 C8 A8

Parameters

Ten data bytes are used.

Parameter Index Length Type
Mode 0 1 Bitfield
Room 1 1 Bitfield
Echo 2 1 Bitfield
EQ Band 1 3 1 Bitfield
EQ Band 2 4 1 Bitfield
EQ Band 3 5 1 Bitfield
EQ Band 4 6 1 Bitfield
EQ Band 5 7 1 Bitfield
EQ Band 6 8 1 Bitfield
EQ Band 7 9 1 Bitfield

Mode

The low three bits carry the mode. The remaining bits are not defined here.

MODE    = 0b0000_0111

Room

The low three bits are used.

ROOM    = 0b0000_0111

Echo

The low three bits are used.

ECHO    = 0b0000_0111

EQ Bands

Each of the seven EQ bytes contains a band index, sign, and magnitude.

BAND    = 0b1110_0000
SIGN    = 0b0001_0000
VALUE   = 0b0000_1111

Band 0b1110_0000

BAND_1  = 0b0000_0000
BAND_2  = 0b0010_0000
BAND_3  = 0b0100_0000
BAND_4  = 0b0110_0000
BAND_5  = 0b1000_0000
BAND_6  = 0b1010_0000
BAND_7  = 0b1100_0000

Sign 0b0001_0000

POSITIVE    = 0b0000_0000
NEGATIVE    = 0b0001_0000

Value 0b0000_1111

Magnitude. Values above 10 are clamped to 10.